SOLIDWORKS, To make the product simple to use sketch, smart dimension and Revolved

The initial steps we have to do, start SolidWorks and open a new part.
Select the Front Plane and sketching.
Make a sketch of the line consisting of four rows and three dimensions.
Make sure the lower left corner of the sketch is the origin.
Click on the Arc in the CommandManager.

Click on the Arc Tangent in the PropertyManager.
Click on the right end of the horizontal line above.
Place the tip of the arc at the tip end of a horizontal line above.
Press the button to end the command line.



Set the dimensions for the bow that we just created
Click on the Smart dimension in-Command Manager.
Create a dimension for each line
Click on the arc.
Set dimensions.
Create an arc radius to.
Click on OK.


Creating a curved edge between the arc and the vertical line.
Click on the Sketch Fillet CommandManager.
Create a radius of 10 mm 'in the Property Manager-.
Click on the bow, to the left of the vertical line.
Click on the vertical line, just below the arc.
Click on OK.