AUTOCAD SOLIDWORKS DESIGN

Do you have requirements for 3D? For modeling, prototyping or rendering? Design, visualize, and document your ideas clearly and efficiently with AutoCAD® software. From conceptual design through drafting and detailing, AutoCAD 2007 enables you to explore ideas like never before. Create, edit, and develop design alternatives using realistic solids and surfaces in an updated design environment. Communicate your ideas with powerful sketch, shadow, and rendering tools, including intuitive walk-through animations. Then turn your concepts into a set of documents with the new section and flatten functionality. AutoCAD LT is a 2D drafting software only and contains no solid and surface modeling tools or sketch, shadow or rendering tools. Would you like to access your software licenses across a network? AutoCAD license management technology enables IT managers to maximize their company’s return on investments. Network licensing provides your users with access to the right software at the right ...

The initial steps we have to do, start SolidWorks and open a new part. Select the Front Plane and sketching. Make a sketch of the line consisting of four rows and three dimensions. Make sure the lower left corner of the sketch is the origin. Click on the Arc in the CommandManager. Click on the Arc Tangent in the PropertyManager. Click on the right end of the horizontal line above. Place the tip of the arc at the tip end of a horizontal line above. Press the button to end the command line. Set the dimensions for the bow that we just created Click on the Smart dimension in-Command Manager. Create a dimension for each line Click on the arc. Set dimensions. Create an arc radius to. Click on OK. Creating a curved edge between the arc and the vertical line. Click on the Sketch Fillet CommandManager. Create a radius of 10 mm 'in the Property Manager-. Click on the bow, to the left of the vertical line. Click on the vertical line, just below the arc. Click on OK.