Skip to main content

The basics of AutoCAD 2012

Understanding the basics of AutoCAD 2012 can be very difficult if we do not have the experience to draw something.

But here we will try, to make things easier and simple with a light application examples.

Here we will try to start all over again how to operate AutoCAD 2012 from the most basic.

The first step we must do in order to use AutoCAD 2012 is the software to install the CD-ROM.

If we are not used to install AutoCAD, we can ask for help from someone who is familiar with the computer system.

For those who want to try to install itself, steps should be taken to install AutoCAD 2012 is:

1. Run AutoCAD Installation Wizard (SETUP.EXE) from a CD or hard drive

2. Select the language of the language (language) used to install and click Install Products

3. In the Select Products to Install, register Autodesk Autocad 2012 and 2012 Material Library and then click Next

4. At the License Agreement, select I Agree and click Next

5. In the User and Product Information, the contents of the required data and populate the serial number and product key / keygen, then click Next.

6. In the Begin Installation, click Install, and when asked whether to use the default configuration / setup,

click yes. Because by default, will install AutoCad for personal computers.

7. Wait until the program finishes installing AutoCad.

8. Click Finish.

AutoCAD has been installed on the computer.

If we use loopholes activation code for Autocad how to extract the CD to the gap in AutoCad program files are installed in C: \ Program Files Autodesk \ \ AutoCAD 2012 - Home

By default, AutoCAD put a shortcut on the desktop. We can double-click this shortcut to start AutoCAD or can from start> Programs> Autodesk> AutoCAD 2012> AutoCAD 2012.

Creating a New Image

After we installed the AutoCAD program, it will automatically open a new image / empty Drawing1.dwg name.

AutoCAD 2012 offers plenty of work space including the preparation and Annotation, basic 3D, 3D modeling, AutoCAD Classic.

When we first opened autocad default screen will appear. If we are going to work in 2D in AutoCAD,

the steps we have to do is:

1. Switching from Workspace window pop-up menu, select the 2D Drafting & Annotation. It shows

ribbon with 2D commands.

2. Select the Application Button> New. From the Select Template dialog box, select acad.dwt and

click Open. This puts you in 2D and off the grid.




Comments

  1. Ersya DesignJuly 21, 2013 at 8:31 AM

    Kami menawarkan Jasa Desain Rumah bernuansa Villa Minimalis Eksterior Online dengan Harga Murah hanya 450ribu perview, minimal order 2view, juga untuk segala macam gambar Desain Rumah 2lantai minimalis modern terbaru, Jasa desain ruko mewah, Gambar desain ruko cepat, murah berpengalaman, Perencanaan taman terbuka, design Landscape, gambsr, ruang terbuka hijau kawasan perkotaan, gambar tampak, gambar Tampak depan bangunan, tampak samping, Render Gambar Tampak, ruko Lengkap, desain ruko minimalis modern, rumah idaman rumah tinggal, Rumah Modern Minimalis, Jasa desain rumah minimalis modern dengan Desain Kolam renang Taman Asri 3D Rumah bangunan lengkap, desain Exterior Rumah tinggal, ruang office kantor, Restoran rumah makan, apartemen, saung, gazebo, Taman Pekarangan Outbond Kolam Landscape secara Cepat dan Berpengalaman.
    Cukup dengan SMS ke 081916200296, 08979198363, Email ke arusha.st@gmail.com, desain yang anda butuhkan sudah sesuai keinginan anda.
    Jasa desain Rumah online
    Contoh-contoh desain yang telah dibuat bisa dilihat di:
    www.desain3d.com
    www.jasa-gambar-desain.blogspot.com
    www.jasa-desain-gambar-murah.blogspot.com
    www.autocad-solidworks-unigraphics.blogspot.com
    www.jasa-interior-eksterior.blogspot.com
    www.jasa-interior-eksterior3d.blogspot.com
    www.jasa-interior-3d.blogspot.com
    www.jasa-eksterior-interior.blogspot.com
    www.jasa-desainer.blogspot.com
    www.jasadesainrumah3d.blogspot.com
    www.interior-rumah-eksterior.blogspot.com
    www.desain-rumah3d.blogspot.com

    ReplyDelete

Post a Comment

Popular posts from this blog

Engineering Drawing and Related Documentation Practices

Drawing Templates in this section are based upon the American Society of Mechanical Engineers ASME Y14 American National Standard for Engineering Drawing and Related Documentation Practices. These standards represent the drawing practices used by U.S. industry. The ASME Y14 practices supersede the American National Standards Institute ANSI standards. The ASME Y14 Engineering Drawing and Related Documentation Practices are published by The American Society of Mechanical Engineers, New York, NY. References to the current ASME Y14 standards are used with permission. Only a portion of the ASME Y14 American National Standard for Engineering Drawing and Related Documentation Practices are presented in this book. Information presented in Projects 1 - 5 represent sample illustrations of a drawing, view and or dimension type. The ASME Y14 Standards Committee develops and maintains additional Drawing Standards. Members of these committees are from Industry, Department of Defense and Academia. ...
Post a Comment
Read more

Rotate the object

We design changes or we pull the wrong angle, we may need to rotate one or more objects that we make.we can easily rotate an object or objects around the basic point that we specify.Base point is usually the object snap points on the object.To demonstrate the rotation, determine the angle of rotation.By default, the zero is to the right, and increased degrees if counter-clockwise. To change the default, select Format> Units By setting a negative angle, we can change the object clockwise. To rotate the object, choose Rotate from the Modify toolbar and select one object. Alternatively, select the object and then select Rotate from the Modify toolbar. Specify base point: prompt, indicating a point about what we want to play. Specify rotation angle or [Copy / Reference]: prompt, type the angle on the command line. Use the Copy option to make a copy of the original object. Once we use the copy option, the prompt return of the same so that we can determine the angle of ro...
Post a Comment
Read more

Callouts and Handles in Solidworks

Callout solidworks are boxes of text that appear in the graphic area when we use certain tools. Makes it easy for us to click, move, and adjust parameters dynamically without leaving the graphic area. Callouts help distinguish different entities. For example, info that shows the profile of a sweep and sweep path. We can do it by dragging to reposition it, but we cannot use it to change the property of the entity they are referring to. Some info, such as for chamfers, will display numbers that you can edit or change to manipulate the size of the entity. The long span handle is extruded. Drag the handle to the desired extrusion depth, and the handle covers the length.
Post a Comment
Read more