Basic Cad 2d dimension angle-Angular Dimensions

To create a dimension angle (Angular Dimensions) From the Dimension menu, select the angle. Use one of the following methods: For the dimension of the circle, select the circle at the end point from the point first and then determine the end point of the second corner. For dimensions of other objects, select the first row, then select the second row. Enter the options as needed: To edit the text content of the dimensions, enter t (text) or m (multiline text). Editing or overwrite in brackets (<>) change or eliminate the value dimension is calculated by AutoCAD. Adding text before or after the parentheses add text before or after the value dimensions. To edit a point of dimension text, insert (Angle). Determine the location dimension arc line Angular dimensions is to measure the angle between two lines or three points, or to measure the angle between two radius of the circle, We can select the circle and determine the end point angle. We can select objects and then make location dimensions. We can also determine the dimensions of angle by determining the angle point and end point. When we make a dimension, we can modify the contents of text and harmony before deciding on the location of the line dimensions. We can make the dimensions of the baseline and angle relative to the dimensions of the existing angle. Corner of Baseline and dimensions are limited to 180 degrees or less. To obtain baseline and follow-dimensional angle greater than 180 degrees, use grip editing to stretch the location of line extensions of existing basic or advanced dimensions. Dimension Lines If we use two straight, nonparallel lines to determine angle, dimension line arc spans the angle between two lines. If the dimension arc line does not meet one or both of the dimension line, AutoCAD draws one or two line extensions to cut the dimension arc line. arc is always less than 180 degrees. Dimension Circles and Arcs If we use the arc or a circle or three points to determine the angle, arc-dimensional AutoCAD draw the line between line extensions. Extension line drawn from the point of intersection of the line endpoint to arc dimensions. We specify a location to determine the dimension arc line quadrant of the angle dimension.

Comments

Engineering Drawing and Related Documentation Practices

Drawing Templates in this section are based upon the American Society of Mechanical Engineers ASME Y14 American National Standard for Engineering Drawing and Related Documentation Practices. These standards represent the drawing practices used by U.S. industry. The ASME Y14 practices supersede the American National Standards Institute ANSI standards. The ASME Y14 Engineering Drawing and Related Documentation Practices are published by The American Society of Mechanical Engineers, New York, NY. References to the current ASME Y14 standards are used with permission. Only a portion of the ASME Y14 American National Standard for Engineering Drawing and Related Documentation Practices are presented in this book. Information presented in Projects 1 - 5 represent sample illustrations of a drawing, view and or dimension type. The ASME Y14 Standards Committee develops and maintains additional Drawing Standards. Members of these committees are from Industry, Department of Defense and Academia. ...

Rotate the object

We design changes or we pull the wrong angle, we may need to rotate one or more objects that we make.we can easily rotate an object or objects around the basic point that we specify.Base point is usually the object snap points on the object.To demonstrate the rotation, determine the angle of rotation.By default, the zero is to the right, and increased degrees if counter-clockwise. To change the default, select Format> Units By setting a negative angle, we can change the object clockwise. To rotate the object, choose Rotate from the Modify toolbar and select one object. Alternatively, select the object and then select Rotate from the Modify toolbar. Specify base point: prompt, indicating a point about what we want to play. Specify rotation angle or [Copy / Reference]: prompt, type the angle on the command line. Use the Copy option to make a copy of the original object. Once we use the copy option, the prompt return of the same so that we can determine the angle of ro...

Callouts and Handles in Solidworks

Callout solidworks are boxes of text that appear in the graphic area when we use certain tools. Makes it easy for us to click, move, and adjust parameters dynamically without leaving the graphic area. Callouts help distinguish different entities. For example, info that shows the profile of a sweep and sweep path. We can do it by dragging to reposition it, but we cannot use it to change the property of the entity they are referring to. Some info, such as for chamfers, will display numbers that you can edit or change to manipulate the size of the entity. The long span handle is extruded. Drag the handle to the desired extrusion depth, and the handle covers the length.

AUTOCAD SOLIDWORKS DESIGN

Search This Blog